Column |
Data Type |
Used By |
Description |
A |
action |
numeric(10,2) |
rivercrit |
action stage (ft) |
actionf |
float |
rivercrit |
flow at action stage (cfs) |
actionq |
char(1) |
rivercrit |
source of action/actionf, valid values:
E=e-19
M=memo
P=personal communication (i.e. phone)
I=internal (i.e. RFC determined)
U=unknown |
active |
char(1) |
ingestfilter |
active sensor? Y/N |
active |
char(1) |
swsmail |
still active? Y/N |
adder |
float |
adjustfactor |
additive factor in formula to change raw value to adjusted value for posting |
address1 |
varchar(40) |
swsmail |
street address, line 1 |
address2 |
varchar(35) |
swsmail |
street address, line 2 |
adimc |
float |
statessacsma |
additional impervious contents (L) |
adimp |
float |
opersacsma |
additional impervious area (%/100) |
adjdur |
char(1) |
qadjust |
SHEF Duration code of adjuster |
adje |
char(1) |
qadjust |
SHEF Extremum code of adjuster |
adjid |
varchar(5) |
qadjust |
location identifier of adjuster |
adjp |
char(1) |
qadjust |
SHEF Probability code of adjuster |
adjpe1 |
char(1) |
qadjust |
1st char SHEF PE of adjuster |
adjpe2 |
char(1) |
qadjust |
2nd char SHEF PE of adjuster |
adjs |
char(1) |
qadjust |
SHEF Source code of adjuster |
adjt |
char(1) |
qadjust |
SHEF Type code of adjuster |
adjustment |
float |
vaddadjust |
additive adjustment to be performed on data prior to verification |
aeadj |
float |
statessnow17 |
areal extent of snow cover adjustment factor |
aei |
float |
statesapicont |
antecedent evapotranspiration index |
aeik |
float |
operapicont |
daily aei recession rate |
aeix |
float |
operapicont |
maximum aei value |
ag |
varchar(6) |
aliasid |
agency/organization (see agency table) |
agcode |
varchar(6) |
agency sensok |
abbreviation for agency |
agloc |
varchar(3) |
agency aliasid sensok |
location of agency |
aiadj |
float |
operapicont |
antecedent index adjustment factor |
aicr |
float |
operapicont |
critical antecedent index value |
aixd |
float |
operapicont |
dry curve intercept |
aixw |
float |
operapicont |
wet curve intercept |
alarm_limit |
float |
datalimits locdatalimits |
threshold data value for issuing forecaster alarms |
alarm_roc_limit |
float |
datalimits locdatalimits |
threshold rate-of-change for issuing forecaster alarms |
alert |
numeric(10,2) |
rivercrit |
alert stage (ft) |
alert_limit |
float |
datalimits locdatalimits |
threshold data value for issuing forecaster alerts |
alert_roc_limit |
float |
datalimits locdatalimits |
threshold rate-of-change for issuing forecaster alerts |
alertf |
float |
rivercrit |
flow for alert stage (cfs) |
alertq |
char(1) |
rivercrit |
source of alert/alertf, valid values:
E=e-19
M=memo
P=personal communication (i.e. phone)
I=internal (i.e. RFC determined)
U=unknown |
allowstg |
float |
rating |
minimum allowable stage to which a rating curve may be extended |
altid |
varchar(16) |
aliasid |
other agency location identifier |
api |
float |
statesapicont |
antecedent precipitation index |
apik |
float |
operapicont |
daily api recession rate |
apiks |
float |
operapicont |
daily api recession rate when 100% snowcover |
apix |
float |
operapicont |
maximum api value |
apr |
float |
avg pempsep pemrsep |
monthly value for April |
aprmf |
float |
opersnow17 |
melt factor for April |
aprmn |
float |
wshistorical |
reasonable min for April |
aprmp |
float |
wshistorical |
most probable for April |
aprmx |
float |
wshistorical |
reasonable max for April |
aprq |
char(1) |
pempsep pemrsep |
SHEF Qualifier code for April |
ati |
float |
statesapicont |
antecedent temperature index |
atin |
float |
operapicont |
minimum ati value |
atir |
float |
operapicont |
temperature weighting factor |
atix |
float |
operapicont |
maximum ati value |
aug |
float |
avg pempsep pemrsep |
monthly value for August |
augmf |
float |
opersnow17 |
melt factor for August |
augmn |
float |
wshistorical |
reasonable min for August |
augmp |
float |
wshistorical |
most probable for August |
augmx |
float |
wshistorical |
reasonable max for August |
augq |
char(1) |
pempsep pemrsep |
SHEF Qualifier code for August |
avg25 |
float |
wsperstats |
25-year average (kaf) (time period determined by the RFC) |
avg30 |
float |
wsperstats |
30-year average (kaf) (time period determined by the RFC) |
avgpor |
float |
wsperstats |
period of record average (kaf) |
B |
b_date |
date |
qadjust |
begin date |
backwater |
varchar(8) |
rivercrit |
indicator of any backwater effects at a river gage site, valid values:
NONE, MINOR, MODERATE, MAJOR |
bank |
numeric(10,2) |
rivercrit |
bankful stage (ft) |
bankf |
float |
rivercrit |
flow at bankful stage (cfs) |
bankq |
char(1) |
rivercrit |
source of bank/bankf, valid values:
E=e-19
M=memo
P=personal communication (i.e. phone)
I=internal (i.e. RFC determined)
U=unknown |
base |
float |
adjustfactor |
base factor in formula to change from raw value to adjusted value |
basistime |
timestamp w/o time zone |
commentvalue
pairedvalues
pedcsep
pedfsep
pehfsep
peqfsep
unkstnvalue
vfypairs |
SHEF creation date and time |
begdate |
date |
slopeprofile |
begin date for the slope profile |
begin_date |
timestamp w/o time zone |
adjustfactor
ratingshift |
begin date of adjustment
begin date & time of shift |
begintime |
timestamp w/o time zone |
flashflood |
beginning date and time of the flash flood event |
bfi |
float |
statesapicont |
baseflow index |
bfik |
float |
operapicont |
daily baseflow index recession rate |
bfim |
float |
operapicont |
baseflow weighting factor |
bfpk |
float |
operapicont |
daily primary baseflow recession rate |
bfsc |
float |
statesapicont |
baseflow storage contents |
bkw_time_window |
real |
ofsdatatrans |
backward timeliness window (decimal hours) for accepting data into OFS through OFS_DE |
bper |
integer |
wsequation
wshistorical
wsperstats |
beginning Water Year month of forecast period |
bsource |
char(3) |
location |
for local RFC use |
C |
cal_yr |
integer |
pemrsep |
calendar year (ccyy) |
calcdate |
date |
avg |
date monthly values were calculated |
calcdate |
date |
avg |
date monthly values were calculated |
cb |
float |
rivercrit |
checkbar stage or the stage at which a wire-weight gage is set for gage calibration purposes at a river station (ft) |
cd |
float |
operapicont |
dry curve curvature constant |
cf |
float |
operapicont |
frost efficiency index freezing constant |
cg |
float |
operapicont |
groundwater inflow curvature constant |
cgroup_abbr |
char(1) |
cgroup |
carryover group abbreviation |
cgroupid |
varchar(8) |
cgroup fgroup |
carryover group id in NWSRFS |
cgroupnum |
integer |
cgroup |
order number of cgroup |
city |
varchar(35) |
swsmail |
city name |
code_position |
char(1) |
shefpetrans |
position of code within value sent with certain SHEF PE codes (specifically IR and SR),
valid values are " " (space), 1, 2, 3,and 4 (depending on the
SHEF PE code) |
code12 |
char(2) |
huc2 huc4 huc6 huc8 |
USGS region code |
code2 |
char(2) |
huc2 |
USGS region code |
code34 |
char(2) |
huc4 huc6 huc8 |
last 2 char of USGS sub-region code |
code4 |
char(4) |
huc4 |
USGS sub-region code |
code56 |
char(2) |
huc6 huc8 |
last 2 char of USGS accounting unit |
code6 |
char(6) |
huc6 huc8 |
USGS accounting unit |
code78 |
char(2) |
huc8 |
last 2 char of USGS cataloging unit |
code8 |
char(8) |
huc8 |
USGS cataloging unit |
coded_value |
integer |
shefpetrans |
integer code used by SHEF PEs (AF, AM, GR, GS, HI, IR, NC, PE, PT, SR, XP, and XW)
that are not data values but rather translate into English phrases (see the V1.3 SHEF Manual) |
comment |
varchar(30) |
sensok |
notification comment (optional) |
comments |
varchar(512) |
flashflood |
additional information about the flash flood event |
compint |
integer |
seg
segoper
operapicont
opersacsma
opersnow17
operunithg |
computational interval (default value is 6) |
conserpool |
float |
reservoir |
the minimum water level of a reservoir to be conserved in order to serve the needs of
downstream water users during non-rainy times of the year (ft MSL) |
country |
varchar(20) |
country |
name of country (mixed case) |
countryfips |
char(2) |
counties country location state |
2 char country FIPS code (for "counties" table the default value is ‘US’)
(upper case) |
county |
varchar(20) |
counties |
county name (mixed case) |
county_name |
varchar(20) |
flashflood |
county name (mixed case) |
countyfips |
char(3) |
counties location |
3 char county FIPS code |
cover |
float |
statessnow17 |
areal extent of snow cover (areal fraction) |
cover0 - cover10 |
float |
opersnow17 |
areal depletion curve values (default value for cover0 is 0.0500000000000000)
default value for cover10 is 1.0000000000000000) |
cp |
float |
operapicont |
frost efficiency index precipitation constant |
crstdatetime |
varchar(5) |
crest |
time of crest |
cs |
float |
operapicont |
seasonal curvature |
cse |
float |
wsequation |
coordinated std error |
csnow |
float |
operapicont |
insulating effect of snow cover for frost index |
ct |
float |
operapicont |
frost efficiency index thaw coefficient |
cw |
float |
operapicont |
wet curve curvature constant |
D |
da |
float |
rivercrit |
drainage area (sq. miles) |
dailyet |
char(7) |
opersacsma |
daily ET, always set to null by get_params application |
damage_dollars |
float |
flashflood |
total dollar damage of flash flood event |
damscreen |
float |
rivercrit |
max stage during dam break |
damscreenf |
float |
rivercrit |
max flow during dam break |
damscreenq |
char(1) |
rivercrit |
source of damscreen/damscreenf
E=e-19
M=memo
P=personal communication (i.e. phone)
I=internal (i.e. RFC determined)
U=unknown |
darea |
float |
operunithg |
drainage area the unit hydrograph represents (square miles) |
dat |
integer |
wsequation |
calibration date (mmddyy) |
datatype |
varchar(5) |
modsetmsng
modtsadd
modtschng
modtsmult
modtsrepl |
OFS datatype the mod is being applied to |
datavalue |
float |
commentvalue
pairedvalues
pedcsep
pedfsep
pedrsep
peoosep
unkstnvalue |
data value |
datecrst |
date |
crest |
date of crest |
datum_adj |
float |
ratingshift |
datum adjustment |
daygm |
float |
opersnow17 |
daily melt at snow-soil interface (mm) |
deadpool |
float |
reservoir |
lowest water level allowed for a reservoir through normal operations (ft MSL) |
deaths |
integer |
flashflood |
number of people killed in flashflood event |
dec |
float |
avg pempsep pemrsep |
monthly value for December |
decmf |
float |
opersnow17 |
melt factor for December |
decmn |
float |
wshistorical |
reasonable min for December |
decmp |
float |
wshistorical |
most probable for December |
decmx |
float |
wshistorical |
reasonable max for December |
decq |
char(1) |
pempsep pemrsep |
SHEF Qualifier code for December |
defined |
char(1) |
areasens |
defined as an area in NWSRFS? Y/N |
derived |
char(1) |
areasens |
elevation derivation, valid values:
C=calibration,
D=default,
E=estimated,
- =none |
des |
varchar(20) |
agency |
description |
desacct |
char(60) |
huc6 |
description |
descat |
varchar(60) |
huc8 |
description |
descr |
varchar(20) |
area
areasens
cgroup
fgroup
operapicont
opersacsma
opersnow17
opertype
operunithg
seg
segoper |
description |
descr |
varchar(30) |
drain pos |
description |
desreg |
varchar(60) |
huc2 |
description |
dessubreg |
varchar(60) |
huc4 |
description |
det |
varchar(40) |
ingestfilter location |
descriptive detail |
dgf |
integer |
wsequation |
degrees of freedom in equation (total) |
distance_dir |
varchar(10) |
flashflood |
distance and direction (whole miles) from the location to the nearest Post Office |
distance01 - distance30 |
real |
slopeprofile |
slope distances (ft and tenths of ft) measured from specified marker to the waters edge |
divisor |
float |
adjustfactor |
divisor factor in formula to change from raw value to adjusted value |
drain |
char(1) |
drain |
watershed drainage, valid values:
H=headwater, L=local |
dt_mass |
integer |
opersnow17 |
time interval for precip, rain, and %snow (defalut value is 6) |
dt_temp |
integer |
opersnow17 |
time interval for temperature (default value is 6) |
dur |
char(1) |
adjustfactor areasens |
SHEF Duration code |
dur |
char(1) |
adjustfactor
areasens
avg
commentvalue
datalimits
ingestfilter
locdatalimits
ofsdatatrans
pairedvalues
pecrsep
pedcsep
pedfsep
pedpsep
pedrsep
pehfsep
pehpsep
pempsep
pemrsep
peoosep
peqfsep
peqpsep
qadjust
sensok
shefdur
unkstnvalue
vaddadjust
vfypairs
wsequation
wsfcst
wshistorical
wsperstats |
SHEF Duration code |
E |
e |
char(1) |
adjustfactor
areasens
avg
commentvalue
ingestfilter
pairedvalues
pecrsep
pedcsep
pedfsep
pedpsep
pedrsep
pehfsep
pehpsep
pempsep
pemrsep
peoosep
peqfsep
peqpsep
qadjust
sensok
shefex
unkstnvalue
vaddadjust
vfypairs
wsequation
wsfcst
wshistorical
wsperstats |
SHEF Extreme code
(Note: areasens default value is ‘Z’) |
e_date |
date |
qadjust |
end date |
edate |
timestamp w/o time zone |
modbublshft
modignorets
modqcshift
modqpshift
modrainsnow
modromult
modrrimult
modsetmsng
modswitchts
modtsadd
modtsmult
modtsrepl
moduadj |
ending date for changes, must be less than or equal to "e;vdate"e; except when
"e;sdate"e; is greater than "e;vdate"e;. (minutes and seconds are always
‘00:00’) |
efa |
float |
operapicont |
effective frost area |
efc |
float |
opersacsma |
effective forest cover (%/100) |
efc |
float |
opersacsma |
effective forest cover |
elev |
integer |
location |
elevation (ft MSL) |
elev |
float |
opersnow17 reservoir |
elevation (ft MSL) |
elev_brk1 |
integer |
areasens |
elevation break #1 (lower) (default value is -9999) |
elev_brk2 |
float |
opersnow17 |
elevations of area-elevation curve (units given in column elevunit) |
elevation |
integer |
flashflood |
elevation (ft MSL rounded to nearest ft) at location of flashflood |
elevation01 - elevation30 |
real |
slopeprofile |
stage height corresponding to slope distance (distance01 - distance 30) (ft) |
elevunit |
char(4) |
opersnow17 |
units of the elevations in the area-elevation curve |
enddate |
date |
slopeprofile |
end date for slope profile |
endtime |
timestamp w/o time zone |
flashflood |
ending date and time of flash flood event |
eng_unit |
varchar(8) |
shefpe |
abbreviation of the English unit for the specified SHEF PE. (eg, ft for feet) |
eper |
integer |
wsequation
wshistorical
wsperstats |
end Water Year month of forecast period |
err |
integer |
prod |
parse & post error print flag: -1=no, 0=yes if errors, 1=yes |
etapr |
float |
opersacsma |
ET demand or PE adjustment for April |
etaug |
float |
opersacsma |
ET demand or PE adjustment for August |
etdec |
float |
opersacsma |
ET demand or PE adjustment for December |
etfeb |
float |
opersacsma |
ET demand or PE adjustment for February |
etjan |
float |
opersacsma |
ET demand or PE adjustment for January |
etjul |
float |
opersacsma |
ET demand or PE adjustment for July |
etjun |
float |
opersacsma |
ET demand or PE adjustment for June |
etmar |
float |
opersacsma |
ET demand or PE adjustment for March |
etmay |
float |
opersacsma |
ET demand or PE adjustment for May |
etnov |
float |
opersacsma |
ET demand or PE adjustment for November |
etoct |
float |
opersacsma |
ET demand or PE adjustment for October |
etsep |
float |
opersacsma |
ET demand or PE adjustment for September |
extremum |
char(1) |
ofsdatatrans vfyruninfo |
SHEF Extremum code |
F |
fax |
varchar(12) |
swsmail |
fax telephone # (xxx-xxx-xxxx) |
fcst_s |
char(1) |
vfypairs |
forecast SHEF Source code |
fcst_t |
char(1) |
vfypairs |
forecast SHEF Type code |
fcstts1 |
char(1) |
vfyruninfo |
forecast SHEF Type code |
fcstts2 |
char(1) |
vfyruninfo |
forecast SHEF Source code |
fcstvalue |
float |
vfypairs |
forecast data value |
feb |
float |
avg pempsep pemrsep |
monthly value for February |
febmf |
float |
opersnow17 |
melt factor for February |
febmn |
float |
wshistorical |
reasonable min for February |
febmp |
float |
wshistorical |
most probable for February |
febmx |
float |
wshistorical |
reasonable max for February |
febq |
char(1) |
pempsep pemrsep |
SHEF Qualifier code for February |
fei |
float |
statesapicont |
frost efficiency index |
fetch_oper |
integer |
modctrl |
fetch mod during operational runs (1=yes, 0=no) |
fetch_spin |
float |
statesapicont |
fetch mod during spin runs (1=yes, 0=no) |
ffg_1_hr |
smallint |
flashflood |
1-hour flash flood guidance value at the beginning the event |
ffg_3_hr |
smallint |
flashflood |
3-hour flash flood guidance value at the beginning the event |
ffg_6_hr |
smallint |
flashflood |
6-hour flash flood guidance value at the beginning the event |
fgix |
float |
statessacsma |
frozen ground index (T) |
fgroupid |
varchar(8) |
fgroup fgroupseg |
current forecast group id in NWSRFS |
fgroupnum |
integer |
fgroup |
forecast group number in carryover group |
fi |
float |
statesapicont |
frost index |
ficr |
float |
operapicont |
critical frost index value |
fis |
numeric(10,2) |
rivercrit |
forecast issuance stage (ft) |
fisf |
numeric(10,2) |
rivercrit |
flow at forecast issuance stage (cfs) |
fisq |
char(1) |
rivercrit |
source of fis/fisf, valid values:
E=e-19
M=memo
P=personal communication (i.e. phone)
I=internal (i.e. RFC determined)
U=unknown |
flood |
numeric(10,2) |
rivercrit |
flood stage (ft) |
floodf |
float |
rivercrit |
flow at flood stage (cfs) |
floodpool |
float |
reservoir |
flood pool elevation (ft MSL) |
floodq |
char(1) |
rivercrit |
source of flood/floodf, valid values:
E=e-19
M=memo
P=personal communication (i.e. phone)
I=internal (i.e. RFC determined)
U=unknown |
flow |
float |
crest |
flow (cfs) |
flow |
real |
flashflood |
flow (cfs) |
flow |
float |
modbublshft |
flow (cfs) |
flow |
float |
modbublshft modqcshift modqpshift |
flow (cfs) |
flow qual |
char(1) |
crest |
qualifier code |
fract1 - fract12 |
float |
opersnow17 |
fractional areas for area-elevation curve |
frsx |
float |
operapicont |
maximum percent runoff |
fwd_time_window |
real |
ofsdatatrans |
the forward timeliness window (decimal hours) for accepting data into OFS through OFS_DE |
G |
gates |
integer |
reservoir |
number of gates |
gbpub |
char(1) |
swsmail |
receives Great Basin pub? Y/N |
gbsurvey |
char(1) |
swsmail |
receives Great Basin survey? Y/N |
ghc |
float |
operapicont |
daily thaw rate due to ground heat |
goes |
varchar(8) |
location |
data collection platform (DCP) identifier |
gra |
char(1) |
prod |
product flag, Y/N |
gross_range_max |
float |
datalimits locdatalimits |
upper end of gross range check |
gross_range_min |
float |
datalimits locdatalimits |
lower end of gross range check |
H |
heatdef |
float |
statessnow17 |
heat deficit (L) |
highscreen |
float |
rivercrit |
upper limit screen stage (ft) |
highscreenf |
float |
rivercrit |
upper limit screen flow (cfs) |
highscreenq |
char(1) |
rivercrit |
source of highscreen/highscreenf:
E=e-19
M=memo
P=personal communication (i.e. phone)
I=internal (i.e. RFC determined)
U=unknown |
hsa |
char(3) |
location |
Hydrologic Service Area WFO identifier (upper case) |
huc |
varchar(8) |
location |
USGS Hydrologic Unit Code |
hw |
char(1) |
crest |
high water mark flag: X=true, Null=false |
hyd |
char(3) |
wsequation |
initials of hydrologist doing development |
I |
id |
varchar(10) |
prod |
product identifier |
id |
varchar(10) |
swsmail |
recipient identifier |
id1 |
varchar(8) |
modaeicqn
modaescchng
modaiadj
modapicbasf
modapicco
modbublshft
modchgblend
modignorets
modmfc
modqcshift
modqpshift
modrainsnow
modrochng
modromult
modrrichng
modrrimult
modsacbasef
modsacco
modsetmsng
modsetqmean
modssarreg
modswitchts
modtsadd
modtschng
modtsmult
modtsrepl
moduadj
moduhgadj
moduhgchng
modweadd
modwechng
modxinco
modzerodiff |
segment identifier |
id2 |
varchar(8) |
modaeicqn
modaescchng
modaiadj
modapicbasf
modapicco
modbublshft
modchgblend modignorets
modmfc
modqcshift
modqpshift
modrainsnow
modrochng
modromult
modrrichng
modrrimult
modsacbasef
modsacco
modsetmsng
modsetqmean
modssarreg
modswitchts
modtsadd
modtschng
modtsmult
modtsrepl
moduadj
moduhgadj
moduhgchng
modweadd
modwechng
modxinco
modzerodiff |
time series identifier (default value is 'NONE') |
idur |
smallint |
adjustfactor
areasens
avg
commentvalue
datalimits
ingestfilter
locdatalimits
ofsdatatrans
pairedvalues
pecrsep
pedcsep
pedfsep
pedpsep
pedrsep
pehfsep
pehpsep
pempsep
pemrsep
peoosep
peqfsep
peqpsep
qadjust
sensok
shefdur
unkstnvalue
vaddadjust
vfypairs
wsequation
wsfcst
wshistorical
wsperstats |
numeric value of SHEF Duration code
(This duration code specifies the units of time and the number of units as follows {where XXX is
the number of units, i.e., eight days would be 2008}:
0 - instantaneous
7XXX - seconds
0XXX - minutes
1XXX - hours
2XXX - days
3XXX - months
4XXX - years
5000 - unspecified
5001 - seasonal
5002 - entire period of record
5003 - variable period
5004 - time period beginning at 7am local time prior to the observation time and
ending at the observation time
5005 - unknown
6XXX - months - end of month) |
impounded |
date |
reservoir |
the date that water was initially impounded by this reservoir |
ingest |
char(1) |
ingestfilter |
post data to database: 0=no, 1=yes |
init |
char(3) |
sensok |
initials of person making the entry |
interpolate |
char(3) |
rating |
method of interpolation/extrapolation used, LIN or LOG |
J |
jam |
char(3) |
crest |
ice jam affect flag: X=true, Null=false |
jan |
float |
avg pempsep pemrsep |
monthly value for January |
janmf |
float |
opersnow17 |
melt factor for January |
janmn |
float |
wshistorical |
reasonable min for January |
janmp |
float |
wshistorical |
most probable for January |
janmx |
float |
wshistorical |
reasonable max for January |
janq |
char(1) |
pempsep pemrsep |
SHEF Qualifier code for January |
jr2 |
float |
wsequation |
equation jackknife r2 (correlation coefficient**2) |
jul |
float |
avg pempsep pemrsep |
monthly value for July |
julmf |
float |
opersnow17 |
melt factor for July |
julmn |
float |
wshistorical |
reasonable min for July |
julmp |
float |
wshistorical |
most probable for July |
julmx |
float |
wshistorical |
reasonable max for July |
julq |
char(1) |
pempsep pemrsep |
SHEF Qualifier code for July |
jun |
float |
avg pempsep pemrsep |
monthly value for June |
junmf |
float |
opersnow17 |
melt factor for June |
junmn |
float |
wshistorical |
reasonable min for June |
junmp |
float |
wshistorical |
most probable for June |
junmx |
float |
wshistorical |
reasonable max for June |
junq |
char(1) |
pempsep |
SHEF Qualifier code for June |
junq |
char(1) |
pempsep pemrsep |
SHEF Qualifier code for June |
K |
keyword |
varchar(5) |
modapicco
modignorets
modrainsnow
modsacco
modssarreg
modswitchts
moduhgadj
modxinco |
for modswitchts default value = 'PCPN'
for moduhgadj default value = 'HADJ'
for modxinco default value = 'WUC') |
L |
lat |
float |
location opersnow17 rivercrit |
latitude (degrees decimal) |
latitude |
real |
flashflood |
latitude (degrees decimal) |
lcpub |
char(1) |
swsmail |
receives Lower Colorado pub? Y/N |
lcsurvey |
char(1) |
swsmail |
receives Lower Colorado survey? Y/N |
liquid |
float |
statessnow17 |
liquid fraction of swe (decimal fraction) |
load |
integer |
modctrl |
save mod to database: 1=yes, 0=no |
location_detail |
varchar(30) |
flashflood |
location information |
lon |
float |
location rivercrit |
longitude (degrees decimal) |
longitude |
real |
flashflood |
longitude (degrees decimal) |
lowscreen |
float |
rivercrit |
lower screen stage (ft) |
lowscreenf |
float |
rivercrit |
lower screen flow (cfs) |
lowscreenq |
char(1) |
rivercrit |
source of lowscreen/lowscreenf
E=e-19
M=memo
P=personal communication (i.e. phone)
I=internal (i.e. RFC determined)
U=unknown |
lwrstage |
float |
modbublshft |
lower stage at which bublshft mod is applied |
lzfpc |
float |
statessacsma |
lower zone free primary contents (L) |
lzfpm |
float |
opersacsma |
lower zone free primary capacity (mm) |
lzfsc |
float |
statessacsma |
lower zone free supplemental contents (L) |
lzfsm |
float |
opersacsma |
lower zone free supplemental capacity (mm) |
lzpk |
float |
opersacsma |
fractional daily primary withdrawal rate |
lzsk |
float |
opersacsma |
fractional daily supplemental withdrawal rate |
lztwc |
float |
statessacsma |
lower zone tension water contents (L) |
lztwd |
float |
statessacsma |
lower zone tension water deficit (L) |
lztwm |
float |
opersacsma |
lower zone tension water capacity (mm) |
M |
majflood |
numeric(10,2) |
rivercrit |
major floodcat stage (ft) |
majfloodf |
float |
rivercrit |
flow of major floodcat stage (cfs) |
majfloodq |
char(1) |
rivercrit |
source of majflood/majfloodf
E=e-19
M=memo
P=personal communication (i.e. phone)
I=internal (i.e. RFC determined)
U=unknown |
mar |
float |
avg pempsep pemrsep |
monthly value for March |
marker |
char(1) |
slopeprofile |
marker used to measure distance to water in slope profile (eg. marker a) |
marmf |
float |
opersnow17 |
melt factor for March |
marmn |
float |
wshistorical |
reasonable min for March |
marmp |
float |
wshistorical |
most probable for March |
marmx |
float |
wshistorical |
reasonable max for March |
marq |
char(1) |
pempsep pemrsep |
SHEF Qualifier code for March |
maxelev |
float |
opersnow17 |
max elevation (100% area) of area-elevation curve (ft MSL) |
maxlapse |
float |
opersnow17 |
lapse rate at time of max temperature (default value is 0.9000000000000000) |
maxswe |
float |
statessnow17 |
seasonal maximum snow water equivalent to date (L) |
may |
float |
avg pempsep pemrsep
|
monthly value for May |
maymf |
float |
opersnow17 |
melt factor for May |
maymn |
float |
wshistorical |
reasonable min for May |
maymp |
float |
wshistorical |
most probable for May |
maymx |
float |
wshistorical |
reasonable max for May |
mayq |
char(1) |
pempsep pemrsep |
SHEF Qualifier code for May |
mbase |
float |
opersnow17 |
base temperature for non-rain melt factor (deg C) |
med25 |
float |
wsperstats |
25-year median (kaf) (time period determined by the RFC) |
med30 |
float |
wsperstats |
30-year median (kaf) (time period determined by the RFC) |
medpor |
float |
wsperstats |
period of record median (kaf) |
met_unit |
varchar(8) |
shefpe |
abbreviation of the Metric unit for the specified SHEF PE (eg, deg C) |
mfmax |
float |
opersnow17 |
maximum non-rain melt factor |
mfmin |
float |
opersnow17 |
minimum non-rain melt factor |
mile |
float |
rivercrit |
river mile |
minelev |
float |
opersnow17 |
minimum elevation (0% area) of area-elevation curve (ft MSL) |
minlapse |
float |
opersnow17 |
lapse rate at time of min temperature (default value is 0.4000000000000000) |
mn |
float |
wsperstats |
historical minimum (kaf) |
mod_name |
varchar(30) |
modctrl |
mod name |
modflood |
numeric(10,2) |
rivercrit |
moderate floodcat stage (ft) |
modfloodf |
float |
rivercrit |
flow for moderate floodcat stage (cfs) |
modfloodq |
char(1) |
rivercrit |
source of modflood/modfloodq
E=e-19
M=memo
P=personal communication (i.e. phone)
I=internal (i.e. RFC determined)
U=unknown |
modvalue |
float |
modaeicqn
modaescchng
modaiadj
modapicbasf
modapicco
modchgblend
modmfc
modrochng
modromult
modrrichng
modrrimult
modsacbasef
modsacco
modsetqmean
modssarreg
modtsadd
modtschng
modtsmult
modtsrepl
moduadj
moduhgadj
moduhgchng
modweadd
modwechng
modxinco
modzerodiff |
Modified data value |
monthdayend |
varchar(5) |
datalimits locdatalimits |
the ending month-day (MM-DD) for a range of days in the year |
monthdaystart |
varchar(5) |
datalimits locdatalimits |
the starting month-day (MM-DD) for a range of days in the year |
mpe_input |
char(1) |
ingestfilter |
feed data to mpe: 0=no, 1=yes |
multiplier |
float |
adjustfactor |
multiplier in formula to change from raw value to adjusted value |
mx |
float |
wsperstats |
historical max (kaf) |
N |
name |
varchar(60) |
location |
station name (city name with distance and direction, mixed case) |
name |
varchar(20) |
state |
name of state (mixed case) |
name |
varchar(20) |
reservoir |
name of reservoir (mixed case) |
name |
varchar(20) |
shefdur
hefex
shefpe1
shefprob
shefqc
shefts |
description (mixed case) |
name |
varchar(30) |
shefpe |
description (mixed case) |
name |
varchar(40) |
swsmail |
name |
name_city_location |
varchar(25) |
flashflood |
city name (mixed case) |
name_river_stream |
varchar(25) |
flashflood |
river/stream name (mixed case) |
ncdc |
char(2) |
state |
NCDC number for state |
net |
char(1) |
prod |
internet disseminatior flag, Y/N |
new_report |
char(1) |
ingestfilter |
new entry? Y/N |
nmf |
float |
opersnow17 |
maximum negative melt factor (mm/deg C/6hr) |
no_timeperiods |
integer |
modmatchng
modrochng
modrrichng
modsetqmean
modssarreg
modtschng
moduhgchng |
number of time periods to apply the mod value |
note1 |
char(50) |
seg |
temporary note/comment field |
note2 |
char(50) |
seg |
temporary note/comment field |
note3 |
char(50) |
seg |
temporary note/comment field |
note4 |
char(50) |
seg |
temporary note/comment field |
nov |
float |
avg pempsep pemrsep |
monthly value for November |
novmf |
float |
opersnow17 |
melt factor for November |
novmn |
float |
wshistorical |
reasonable min for November |
novmp |
float |
wshistorical |
most probable for November |
novmx |
float |
wshistorical |
reasonable max for November |
novq |
char(1) |
pempsep pemrsep |
SHEF Qualifier code for November |
numfgroups |
integer |
cgroup |
number of forecast groups in the carryover group |
numoper |
integer |
seg |
number of operations |
numpts |
integer |
opersnow17 |
number of points in the area-elevation curve |
numsegs |
integer |
fgroup |
number of segments in the forecast group |
O |
obs_s |
char(1) |
vfypairs |
observed SHEF Source code |
obs_t |
char(1) |
vfypairs |
observed SHEF Type code |
obstime |
time w/o time zone |
ingestfilter
pedcsep
pedfsep
pedrsep
peoosep
statesapicont
statessacsma
statessnow17
vfypairs |
observation date and time |
obstime |
date |
pecrsep
pehfsep
pehpsep
peqfsep
peqpsep |
observation date |
obstime |
date |
pedpsep |
observation date, where day is always the first of the month, i.e. ‘01’ |
obsvalue |
float |
vfypairs |
observed data value |
oct |
float |
avg pempsep pemrsep |
monthly value for October |
octmf |
float |
opersnow17 |
melt factor for October |
octmn |
float |
wshistorical |
reasonable min for October |
octmp |
float |
wshistorical |
most probable for October |
octmx |
float |
wshistorical |
reasonable max for October |
octq |
char(1) |
pempsep pemrsep |
SHEF Qualifier code for October |
offsets |
float[ ] |
rating |
array of stage, offset pairs |
ofs_data_type |
char(4) |
ofsdatatrans ofsstntrans |
data type identifiers used in OFS Version 5 (e.g., PP06, TWEL, TN24, etc.) |
ofs_input |
char(1) |
ingestfilter |
feed data to OFS: 0=no, 1=yes |
ofs_lid |
varchar(8) |
ofsstntrans |
the unique identifier used by OFS for a station location |
ok |
char(1) |
sensok |
N=bad, Y=good |
oktime |
timestamp w/o time zone |
sensok |
date and time of change in status |
olddatum |
char(1) |
crest |
true/false flag where X=true (entry is based on old datum), Null=false |
operid |
varchar(8) |
modaeicqn
odaescchng
modaiadj
modapicbasf
modapicco
modbublshft
modchgblend
modignorets
modmfc
modqcshift
modqpshift
modrainsnow
modrochng
modromult
modrrichng
modrrimult
modsacbasef
modsacco
modsetqmean
modssarreg
modswitchts
modtsadd
modtschng
modtsmult
modtsrepl
moduadj
moduhgadj
moduhgchng
modweadd
modwechng
modxinco
modzerodiff
segoper |
NWSRFS operation identifier within a segment (default value is ‘ALL’) |
opertype |
varchar(10) |
modtsadd
modtsmult
modtsrepl
opertype
segoper |
NWSRFS operation type within a segment (default value is ‘ALL’) |
opid |
varchar(8) |
operapicont
opersacsma
opersnow17
operunithg
statesapicont
statessacsma
statessnow17 |
current operation id in NWSRFS segment |
othagid |
varchar(16) |
rating |
other agency identifier |
ownag |
varchar(6) |
ingestfilter |
owner agency |
owner |
varchar(10) |
reservoir |
owner of dam |
ownloc |
char(3) |
ingestfilter |
owner agency location |
P |
p |
char(1) |
areasens
avg
commentvalue
pairedvalues
pecrsep
pedcsep
pedfsep
pedpsep
pedrsep
pehfsep
pehpsep
pempsep
pemrsep
peoosep
peqfsep
peqpsep
qadjust
sensok
shefprob
unkstnvalue
vfypairs
wsequation
wsfcst
wshistorical
wsperstats |
owner agency location |
pap |
integer |
prod |
parse & post flag: 0=no, 1=yes |
pbase |
float |
opersacsma |
primary baseflow (cms) |
pctimp |
float |
opersacsma |
minimum impervious area (%/100) |
pe1 |
char(1) |
adjustfactor
areasens
avg
commentvalue
datalimits
ingestfilter
locdatalimits
ofsdatatrans
pairedvalues
pecrsep
pedcsep
pedfsep
pedpsep
pedrsep
pehfsep
pehpsep
pempsep
pemrsep
peoosep
peqfsep
peqpsep
qadjust
rating
ratingshift
rivercrit
sensok
shefpe
shefpe1
shefpetrans
unkstnvalue
vaddadjust
vfypairs
vfyruninfo
wsequation
wsfcst
wshistorical
wsperstats |
1st char SHEF PE code |
pe2 |
char(1) |
adjustfactor
areasens
avg
commentvalue
datalimits
ingestfilter
locdatalimits
ofsdatatrans
pairedvalues
pecrsep
pedcsep
pedfsep
pedpsep
pedrsep
pehfsep
pehpsep
pempsep
pemrsep
peoosep
peqfsep
peqpsep
qadjust
rating
ratingshift
rivercrit
sensok
shefpe
shefpetrans
unkstnvalue
vaddadjust
vfypairs
vfyruninfo
wsequation
wsfcst
wshistorical
wsperstats |
2nd char SHEF PE code |
peadj |
float |
operapicont opersacsma |
ET demand adjustment factor |
peakpub |
char(1) |
swsmail |
receives Peak Flow pub? Y/N |
peaksurvey |
float |
opersacsma |
receives Peak Flow survey? Y/N |
peaktime |
timestamp w/o time zone |
flashflood |
date and time peak stage/flow occurred for the flash flood event |
pen |
float |
operapicont |
minimum daily PE rate |
pex |
float |
operapicont |
maximum daily PE rate |
pfree |
float |
opersacsma |
percolated water which always goes directly to lower zone free water storages (%/100) |
pimpv |
float |
operapicont |
percent impervious area |
plwhc |
float |
opersnow17 |
maximum amount of liquid-water held against gravity drainage (decimal fraction) |
pmax |
integer |
prod |
number of versions to store |
pool |
float |
rivercrit |
normal pool elevation (ft MSL) at a river station (desired elevation for water supply
purposes, is really the same as conserpool in the Reservoir table) |
por |
varchar(30) |
rivercrit |
period of record |
pos |
char(1) |
pos |
area position within watershed: G=glacial, U=upper, L=lower,
M=middle, 0=only |
post |
smallint |
location |
post code,valid values: 0=no post, 1=post everything, 2=check ingestfilter table ingest
flag |
postingtime |
timestamp w/o time zone |
commentvalue
pairedvalues
pedcsep
pedfsep
pedrsep
peoosep
unkstnvalue |
date and time data was posted to the database |
power |
integer |
shefqc |
ranking order of quality codes |
pr1 |
char(1) |
prod |
print flag for device 1: Y/N |
prc |
integer |
wsequation |
number of principal components |
postingtime |
timestamp w/o time zone |
commentvalue
pairedvalues
pedcsep
pedfsep
pedrsep
peoosep
unkstnvalue |
date and time data was posted to the database |
power |
integer |
shefqc |
ranking order of quality codes |
pr1 |
char(1) |
prod |
print flag for device 1: Y/N |
prc |
integer |
wsequation |
number of principal components |
precip_gage1_amt |
real |
flashflood |
storm total at precip gage #1 (inches) |
precip_gage2_amt |
real |
flashflood |
storm total at precip gage #2 (inches) |
precip_gage3_amt |
real |
flashflood |
storm total at precip gage #3 (inches) |
precip_gage1_idur |
smallint |
flashflood |
storm total duration at gage #1 (hours) |
precip_gage2_idur |
smallint |
flashflood |
storm total duration at gage #2 (hours) |
precip_gage3_idur |
smallint |
flashflood |
storm total duration at gage #3 (hours) |
precip_gage1_name |
varchar(20) |
flashflood |
location of precip gage #1 |
precip_gage2_name |
varchar(20) |
flashflood |
location of precip gage #2 |
precip_gage3_name |
varchar(20) |
flashflood |
location of precip gage #3 |
prelim |
char(1) |
crest |
preliminary value flag: X=true, Null=false |
printout |
char(4) |
opersnow17 |
printer output control |
probability |
real |
shefprob |
numerical value of forecast probability as defined in Table 6 of the SHEF manual (two codes
do not have assigned probability values in the SHEF Manual, M (mean) and Z (filler); the SHEF
Parser program assigns values of M = -0.5, Z = 1.0) |
product_id |
char(10) |
commentvalue
pairedvalues
pedcsep
pedfsep
pedrsep
peoosep
unkstnvalue |
product identifier |
producttime |
timestamp w/o time zone |
commentvalue
pairedvalues
pedcsep
pedfsep
pedrsep
peoosep
unkstnvalue |
product date and time |
pub1 |
char(4) |
wsequation |
publication code, mmdd (mm is the month, dd is the day and is always 01) |
pub2 |
char(1) |
wsequation |
publication code, valid values are P (official/published equation) and a-z |
pxadj |
float |
operapicont opersacsma opersnow17 |
precipitation adjustment factor (default is 1.0000000000000000) |
pxtemp |
float |
opersnow17 |
temperature that separates rain from snow (deg C) |
Q |
q |
float |
operunithg |
unit hydrograph ordinates (cms/mm or cfs/in) |
quality_code |
integer |
commentvalue
pairedvalues
pedcsep
pedfsep
pedrsep
peoosep
unkstnvalue
vfypairs |
A single integer number that holds all results of Q/C testing performed on the data value.
The results of the Q/C tests are bit-packed into this number.
Summary of Q/C Bits
Bit 31: sign bit, always 0
Bit 30: Value-Not-Bad summary indicator
Bit 29: Value-Not-Questionable summary indicator
Bit 28: post data ingest tests performed indicator
Bits 24-27: reserved for future use
Bit 23: external Q/C Not-Bad indicator
Bit 22: manual Q/C Good indicator
Bit 21: gross range test result
Bit 20: external Q/C Not-Questionable indicator
Bit 19: reasonableness range test result
Bit 18: rate-of-change test result
Bits 08-17: reserved for future national tests
Bits 00-07: available for local tests |
qz00,qz06,qz12,qz18 |
char(1) |
peqfsep peqpsep |
pseudo array, SHEF Qualifier codes for 6-hrly time step data |
qz0000 - qz2345 |
char(1) |
pecrsep |
pseudo array, SHEF Qualifier codes for 15-min time step data |
qzday01 - qzday31 |
char(1) |
pecrsep |
pseudo array, SHEF Qualifier codes for daily time step data |
qzhr00 - qzhr23 |
char(1) |
pehfsep pehpsep |
pseudo array, SHEF Qualifier codes for hourly data |
R |
rdate |
timestamp w/o time zone |
modaeicqn
modaescchng
modaiadj
modapicbasf
modapicco
modbublshft
modchgblend
modignorets
modmfc
modqcshift
modqpshift
modrainsnow
modrochng
modromult
modrrichng
modrrimult
modsacbasef
modsacco
modsetmsng
modsetqmean
modssarreg
modswitchts
modtsadd
modtschng
modtsmult
modtsrepl
moduadj
moduhgadj
moduhgchng
modweadd
modwechng
modxinco
modzerodiff |
date mod was deleted from NWSRFS
date and time (minutes and seconds are always '00:00') |
reason |
varchar(80) |
sensok |
reason for change in status (optional) |
reason_range_max |
float |
datalimits locdatalimits |
largest reasonable data value for a particular data type (eg, 120 deg F), used for automated
Q/C control by the SHEF Decoder ingest process (expected to be more restrictive than a
gross_range_max data limit) |
reason_range_min |
float |
datalimits locdatalimits |
smallest reasonable data value for a particular data type (eg, 29.00 in Hg), used for
automated data Q/C by the SHEF Decoder ingest process (expected to be more restrictive than a
gross_range_min data limit) |
record |
numeric(10,2) |
rivercrit |
stage of record (ft) |
recordf |
float |
rivercrit |
flow of record (cfs) |
recordq |
char(1) |
rivercrit |
source of record/recordf, valid values:
E=e-19
M=memo
P=personal communication (i.e. phone)
I=internal (i.e. RFC determined)
U=unknown |
ref_value |
integer |
pairedvalues |
second independent variable for use in prime key |
regional |
char(1) |
areasens |
regionalized MAP/MAP delineation? Y/N (default value is ‘N’) |
remark |
varchar(255) |
rivercrit |
stores any type of documentation or commentary in a free text format |
response_time |
float |
rivercrit |
typical or average response time (hours) for flooding to occur at this river station from a
precipitation event |
resptime |
varchar(8) |
vfyruninfo |
FAST - < 24 hours response time
MEDIUM - >= 24 hours and < 60 hours
SLOW - >= 60 hours |
revision |
char(1) |
commentvalue
pairedvalues
pedcsep
pedfsep
pedrsep
peoosep
unkstnvalue |
SHEF revision flag |
rexp |
float |
opersacsma |
exponent for the percolation equation |
rfc |
char(2) |
location rfc |
first 2 characters of the RFC acronym (upper case) (eg, MB for MBRFC) |
rfs_id |
varchar(8) |
areasens |
NWSRFS area id |
rfs_input |
char(1) |
rating |
used by OFS, Y/N |
riva |
float |
opersacsma |
riparian vegetation area (%/100) |
riva |
float |
operapicont |
riparian vegetation coverage |
roc_max |
float |
datalimits locdatalimits |
the largest possible rate-of-change for a particular data type (in data type units per hour;
eg, 3.0 ft/hr for a river stage) |
rrevise |
date |
rivercrit |
the date when E-19 data was last updated for a river station |
rserv |
float |
opersacsma |
lower zone free water which cannot be transferred to lower zone tension water (%/100) |
rval |
float |
operapicont |
critical antecedent index value for riparian vegetation |
S |
s |
char(1) |
adjustfactor
areasens
avg
commentvalue
ingestfilter
pairedvalues
pecrsep
pedcsep
pedfsep
pedpsep
pedrsep
pehfsep
pehpsep
pempsep
pemrsep
peoosep
peqfsep
peqpsep
qadjust
sensok
shefts
unkstnvalue
vaddadjust
wsequation
wsfcst
wshistorical
wsperstats |
SHEF Source code |
s_or_f |
char(1) |
modaeicqn
modaescchng
modaiadj
modapicbasf
modapicco
modchgblend
modignorets
modmfc
modrainsnow
modrochng
modromult
modrrichng
modrrimult
modsacbasef
modsacco
modswitchts
moduadj
moduhgadj
modweadd
modwechng
modxinco |
apply mod to segment or forecast group, S or F (default value is ‘S’) |
sbd |
date |
location reservoir |
begin date (mm/dd/ccyy) |
screenrate |
float |
rivercrit |
max rise (rate of change) allowed for stage (ft) |
screenratef |
float |
rivercrit |
max rise (rate of change) allowed for flow (cfs) |
screenrateq |
char(1) |
rivercrit |
source for screenrate/screenratef
E=e-19
M=memo
P=personal communication (i.e. phone)
I=internal (i.e. RFC determined)
U=unknown |
sdate |
timestamp w/o time zone |
modaeicqn
modaescchng
modaiadj
modapicbasf
modapicco
modbublshft
modchgblend
modignorets
modmfc
modqcshift
modqpshift
modrainsnow
modrochng
modromult
modrrichng
modrrimult
modsacbasef
modsacco
modsetmsng
modsetqmean
modssarreg
modswitchts
modtsadd
modtschng
modtsmult
modtsrepl
moduadj
moduhgadj
moduhgchng
modweadd
modwechng
modxinco
modzerodiff |
date for which the data value applies, must be greater than or equal to the Technique STARTRUN
start date and time (minutes and seconds are always ‘00:00’) |
screenratet |
float |
rivercrit |
time interval for screenrate/screenratef (hours or fractional hours) |
seas_mf |
integer |
opersnow17 |
seasonal melt-factor variation (default value is 0) |
sed |
date |
location reservoir |
end date (mm/dd/ccyy) (Note: for Location table, sed must be null for most current sbd, or
data will not post) |
segid |
varchar(8) |
fgroupseg
operapicont
opersacsma
opersnow17
operunithg
seg
segoper
statesapicont
statessacsma
statessnow17 |
segment id |
segnum |
integer |
ffgroupseg |
order number of segment within forecast group |
senrk |
smallint |
vfyruninfo |
sensor rank, i.e. 1, 2 or 3 |
sents1 |
char(1) |
ffgroupseg |
the SHEF Type code of the observed type source corresponding to the sensor |
sents2 |
char(1) |
ffgroupseg |
the SHEF Source code of the observed type source corresponding to the sensor |
sep |
float |
avg pempsep pemrsep |
monthly value for September |
sepmf |
float |
opersnow17 |
melt factor for September |
sepmn |
float |
wshistorical |
reasonable min for September |
sepmp |
float |
wshistorical |
most probable for September |
sepmx |
float |
wshistorical |
reasonable max for September |
sepq |
char(1) |
pempsep pemrsep |
SHEF Qualifier code for September |
sh_a |
float |
ratingshift |
first shift |
sh_b |
float |
ratingshift |
second shift |
sh_c |
float |
ratingshift |
third shift |
sh_d |
float |
ratingshift |
fourth shift |
shef_comment |
varchar(80) |
commentvalue |
a comment about a piece of data (i.e., a forecast value or an observed value) sent with a
SHEF encoded message |
shef_qualifier_code |
char(1) |
commentvalue
pairedvalues
pedcsep
pedfsep
pedrsep
peoosep
shefqc
unkstnvalue |
SHEF Qualifier code |
shef_source_code |
char(1) |
ofsstntrans |
SHEF Source code |
si |
float |
opersnow17 |
areal water-equivalent above which there is always 100% snow cover (mm) |
side |
float |
opersacsma |
ratio of non-channel baseflow to channel baseflow |
sign |
char(1) |
qadjust |
addition (+) or subtraction (-) |
sigrate |
float |
rivercrit |
significant rise (rate of change) value for stage (ft) |
sigratef |
float |
rivercrit |
significant rise (rate of change) value for flow (cfs) |
sigrateq |
char(1) |
rivercrit |
source for sigrate/sigratf, valid values:
E=e-19
M=memo
P=personal communication (i.e. phone)
I=internal (i.e. RFC determined)
U=unknown |
sigratet |
float |
rivercrit |
time interval for sigrate/sgratef (hours or fractional hours) |
sill |
float |
reservoir |
elevation of the sill structure of the dam that holds a reservoir (ft MSL) |
size_mi2 |
integer |
areasens |
watershed size (drainage area) (sq. miles) |
slot |
integer |
modmatchng
modrochng
modrrichng
modsetqmean
modssarreg
modtschng
moduhgchng
operunithg
qadjust |
order number |
smi |
float |
statesapicont |
surface moisture index |
smix |
float |
operapicont |
maximum value for smi |
source |
varchar(25) |
flashflood |
source of the flash flood information |
spillway |
float |
reservoir |
elevation of the dam spillway structure |
sr2 |
float |
wsequation |
equation r2 (correlation coefficient**2) |
src |
varchar(10) |
ratingshift rating |
source of rating table, for example: USGS, ALERT, CODWR, USBR, USACE, OFS, etc. |
sse |
float |
wsequation |
equation std error |
stage |
float |
crest |
stage value (ft) |
stage |
real |
flashflood |
peak stage (ft) for the flash flood event |
stage |
float |
modbublshft modqcshift modqpshift |
stage value of stage/discharge pair given in mod (ft) |
stage |
state |
counties
flashflood
location
state |
2-char Post Office state code (upper case) |
stage |
varchar(10) |
swsmail |
can be state name but recommend use 2-char Post Office state code |
statefips |
char(2) |
state |
state FIPS code |
std25 |
float |
wsperstats |
25-year std deviation (kaf) (time period determined by the RFC) |
std30 |
float |
wsperstats |
30-year std deviation (kaf) (time period determined by the RFC) |
std30 |
float |
wsperstats |
30-year std deviation (kaf) (time period determined by the RFC) |
stdpor |
float |
wsperstats |
period of record std deviation (kaf) |
stg_qual |
char(1) |
crest |
quality code |
stgflow |
float[ ] |
rating |
array of stage and flow pairs |
stream |
varchar(32) |
rivercrit |
name of river/stream (mixed case) |
subarea |
integer |
modxinco |
sub-area number to which the change applies |
sums_sc |
char(4) |
opersnow17 |
option to store sums of snow cover water balance variables (default value is SUMS) |
surchg |
float |
reservoir |
maximum elevation (ft MSL) for water stored in a reservoir before release is required |
swe |
float |
statessnow17 |
current snow water equivalent (L) |
T |
t |
char(1) |
adjustfactor
areasens
avg
commentvalue
ingestfilter
pairedvalues
pecrsep
pedcsep
pedfsep
pedpsep
pedrsep
pehfsep
pehpsep
pempsep
pemrsep
peoosep
peqfsep
peqpsep
qadjust
sensok
shefts
unkstnvalue
vaddadjust
wsequation
wsfcst
wshistorical
wsperstats |
SHEF Type code |
taelev |
float |
opersnow17 |
elevation of temperature time series |
tbl |
numeric(6,2) |
rating |
number of rating table |
tbl_ver |
numeric(6,2) |
ratingshift |
number of rating table |
threshold_runoff |
float |
rivercrit |
threshold runoff value (inches) for a site (used by the Site-Specific Model) |
tide |
varchar(8) |
rivercrit |
indicator of tidal effects applicable to a river station, valid values: NONE, MINOR,
MODERATE, MAJOR |
timeint |
integer |
modsetmsng
modssarreg
modtsadd
modtschng
modtsmult
modtsrepl |
time interval |
tindex |
float |
statessnow17 |
antecedent temperature index factor (T) |
tipm |
float |
opersnow17 |
antecedent snow temperature index parameter |
top |
float |
reservoir |
elevation (ft MSL) of the top of dam |
ts_rank |
smallint |
ingestfilter |
numerical ranking of alternate SHEF Type Source codes for the same location and parameter |
type |
varchar(10) |
reservoir |
type of dam construction (eg, earthen, concrete, levee, gravity, arch) |
U |
uadj |
float |
opersnow17 |
average value of the wind function during rain-on-snow events (mm/mb) |
ucpub |
char(1) |
swsmail |
receives Upper Colorado pub? Y/N |
ucsurvey |
char(1) |
swsmail |
receives Upper Colorado survey? Y/N |
uhgdur |
integer |
rivercrit |
unit hydrograph duration (hours) |
units |
char(4) |
rating |
ENGL or METR |
units |
char(1) |
operapicont
opersacsma
opersnow17
operunithg
statesapicont
statessacsma
statessnow17 |
E=English, M=Metric |
update |
char(6) |
opersnow17 |
update option (only used for Calibration System programs) |
updtcov |
float |
opersnow17 |
tolerance used when updating areal extent of snow cover
(default value is 0.0000000000000000) |
updtwe |
float |
opersnow17 |
tolerance used when updating water equivalent (decimal fraction)
(default value is 0.0000000000000000) |
uprstage |
float |
modbublshft |
upper stage at which bublshft mod is applied |
use_avse |
char(4) |
opersnow17 |
rain-snow elevation option |
use_carry |
char(4) |
opersnow17 |
read carryover option |
uses |
varchar(8) |
reservoir |
designator of the uses made of a reservoir |
uzfwc |
float |
statessacsma |
upper zone free water contents (L) |
uzfwm |
float |
opersacsma |
upper zone free water capacity (mm) |
uzk |
float |
opersacsma |
fractional daily upper zone free water withdrawal rate |
uztwc |
float |
statessacsma |
upper zone tension water contents (L) |
uztwd |
float |
statessacsma |
upper zone tension water deficit (L) |
uztwm |
float |
statessacsma |
upper zone tension water capacity (mm) |
V |
val_a |
float |
ratingshift |
stage value for first shift |
val_b |
float |
ratingshift |
stage value for second shift |
val_c |
float |
ratingshift |
stage value for third shift |
val_d |
float |
ratingshift |
stage value for fourth shift |
valid_date |
timestamp w/o time zone |
rating |
valid date and time of rating curve |
tr |
timestamp w/o time zone |
commentvalue
pairedvalues
pedcsep
pedfsep
pehfsep
unkstnvalue
vfypairs |
date-time when a forecast value is valid |
value_trans |
varchar(80) |
shefpetrans |
description of what the coded value translates to |
vcal |
varchar(5) |
wsequation |
begin WYR month for variables 1 thru 15 |
vbm1 - vbm15 |
integer |
wsequation |
calibration period (yy-yy) |
vcf1 - vcf15 |
float |
wsequation |
coefficient (wgt) for variables 1 thru 15 |
vdate |
timestamp w/o time zone |
modmatchng
modrochng
modromult
modrrichng
modrrimult
modsetqmean
modssarreg
modswitchts
modtsadd
modtschng
modtsmult
modtsrepl |
the date after which the MOD is no longer valid, usually less than or equal to
Technique LSTCMPDY valid date and time (minutes and seconds are always ‘00:00’) |
vdatum |
varchar(20) |
rivercrit |
Reference value on which the gage zero (zd) is based. This generally is the National Geodetic
Vertical Datum of 1929 (NGVD 1929) or the North American Vertical Datum of 1988 (NAVD 88). Not all
locations use these datums (for example, river gages on the Ohio River use NGVD 1913, also referred
to as the Ohio River Datum). |
vdtime |
date |
rivercrit |
valid date of entry, information is valid from this point in time forward |
vem1 - vem15 |
integer |
wsequation |
end WYR month for variables 1 thru 15 |
vid1 - vid15 |
varchar(5) |
wsequation |
5-char lid of variables 1 thru 15 |
voice |
varchar(12) |
swsmail |
voice telephone # (xxx-xxx-xxxx) |
vpd1 - vpd15 |
varchar(7) |
wsequation |
SHEF codes of variables 1 thru 15 |
W |
wfo |
char(3) |
counties flashflood location |
WFO identifier (upper case) |
wfo_hsa |
char(3) |
wfo_hsa |
WFO identifier (upper case) |
wkd |
float |
operapicont |
climatologically driest week number (1-52) |
wkw |
float |
operapicont |
climatologically wettest week number (1-52) |
wyr |
integer |
wshistorical |
water year (ccyy) |
XYZ |
ymn |
integer |
wsperstats |
year of historical minimum (ccyy) |
ymx |
integer |
wsperstats |
year of historical maximum (ccyy) |
ytrans |
char(2) |
wsequation |
Y transmission where: nl=natural log, sr=square root, cr=cube root |
z00,z06,z12,z18 |
float |
peqfsep peqpsep |
6-hrly time step data values |
z0000 - z2345 |
float |
pecrsep |
15-min time step data values |
zd |
float |
rivercrit |
elevation of the gage zero (i.e. when the gage reads zero) (ft MSL) (usually reported to the
nearest 0.01 ft) |
zday01-zday31 |
float |
pedpsep |
daily data values |
zhr00 - zhr23 |
float |
pehfsep pehpsep |
hourly data values |
zip |
varchar(11) |
swsmail |
Zip Code |
zon |
char(4) |
counties location |
NWS zone code |
zperc |
float |
opersacsma |
maximum percolation rate |